Planters and drills

ALCOR 7,5

ALCOR 7,5 - are designed for seeding grain, small- and average-seeded legumes, as well as other crops similar to grain crops in size and seeding rates, in stubbly, fallow, and cultivated soil. Seeding machine ALCOR 7,5 is fit with feeding unit featuring a metal seed and fertilizer hopper 9000 totaling in 9620 liters (dm3). Coils of seeding machines are polyurethane providing an increased service life. The screwed direction of coil teeth provides for continuous flow of seeds and fertilizers.

Product specifications

Aggregate type   semitrailed Output
ha/h
7 - 8
Working width
m
7,3
Drilling depth for seeds and fertilizers
mm
30 - 120
Seed sowing rate
kg/ha
0,8 - 350
Fertilizer sowing rate
kg/ha
25 - 200
Sowing strip width
mm
120 - 170
Seed tank capacity
l
3430
Fertilizer tank capacity
l
2290
Row spacing
cm
30,5
Interspacing between working organs in row
mm
915
Interspacing between tine rows
mm
650
Number of working organs
pcs
24
Number of tine rows
pcs
3
Span width of V-shaped tine
mm
370
Tilling depth for cultivation
mm
30 to 180
Operating speed
km/h
8 - 10
10 Overall dimensions in transport position
((LxWxH) mm
12650х5540х3390
Weight
kg
8000
Required power of tractor engine, min
h.p.
220
 

Features

Seeding machine ALCOR 7,5 are designed for the following seeding techniques:
– traditional seeding;
– minimum tillage;
– zero-tillage.
 
 ALCOR 7,5 - are designed for seeding grain, small- and average-seeded legumes, as well as other crops similar to grain crops in size and seeding rates, in stubbly, fallow, and cultivated soil, while also ensuring:
– cultivation and 100% agrestals cutting to sowing depth;
– simultaneous application of granulated mineral fertilizers into sown rows;
– strip sowing of crops. for zero tillage soil the height of afterharvesting residues shall not exceed 15 cm;
– harrowing out of cropped agrestals;
 – crop compaction.
 

Operative parts

Seeding machine ALCOR 7,5 is fit with feeding unit featuring a metal seed and fertilizer hopper 9000 totaling in 9620 liters (dm3).
Coils of seeding machines are polyurethane providing an increased service life.
The screwed direction of coil teeth provides for continuous flow of seeds and fertilizers.
 
 
Seed and fertilizer feeding units are fit with variators providing for smooth control of seeding rates, and greatly simplifying and reducing setup time of the seeding machine.
 
 
 
 
 
The fan REM 33 driven by a self-contained diesel engine Lambordini, 24 hp, tank volume 25 liters, or driven by a hydraulic motor, feeds sowing material from the hopper to the working organs.
 
 
 
 
 
 
 
Horizontal distribution heads, unlike vertical heads, do not require a powerful airflow for transporting the sowing material. This provides additional benefits when sowing heavy seeds of pulse and leguminous crops.
 
 
 
Seeding machines ALCOR are two agricultural devices in one: air seeder + heavy cultivator. After sowing crops, the feeding unit of the seeding machine is disengaged and the cultivator is used as a separate instrument. >Seeding machines ALCOR 7,5 can qualitatively sow from 60 to 90 hectares within a daylight. The strip sowing technique provides each sprout with a 3-4 times larger feeding area power compared to the row sowing technique, which can improve the yield by 3-6 tons per hectare, and achieve a higher quality of grain, including the gluten parameter. The V-shaped sweep (by BELLOTA) is 370 mm wide.